[MR2] Compression ratio

[Byron]

That's the gist of it. The BGB is a wealth of information, so buying a 
copy, actually broken into two books, one for the engine and one for the 
chassis, is IMO a necessity. You need RM285U1 for the engine and RM308U2 
for chassis, body and electrical. In addition, a separate electrical 
manual is available, EWD144U.

Byron

John Treadwell wrote:
> Alright, I will have to get a copy of this book, but if I understand 
> this shimmy shimmy process, it involves checking the valve clearance 
> with a feeler gauge, and then, if they are off, you somehow, remove 
> the current shim for that specific valve, test it with a micrometer, 
> and then replace it with a shim that is the appropriate size?
> Is that about right?
> Thanks,
> --John