[MR2] Studs

[Donald Chalfant]

Actually, I have two 20 ton presses. In case I need that 40 ton push someday. 8)
  ----- Original Message ----- 
  From: Wayne Arndt 
  To: 'Byron' ; mr2 at mr2.com 
  Sent: Friday, April 02, 2010 11:08 PM
  Subject: Re: [MR2] Studs


  But seriously, who on this list doesn't have a sledge hammer & hydraulic
  press? Haha





  -----Original Message-----
  From: mr2-bounces at mr2.com [mailto:mr2-bounces at mr2.com] On Behalf Of Byron
  Sent: Friday, April 02, 2010 10:46 PM
  To: mr2 at mr2.com
  Subject: Re: [MR2] Studs

  If you don't have a sledge hammer and punch or a hydraulic press, buy 
  the replacement studs and take them and the drum to a local automotive 
  machine shop and they'll make quick work of it.

  Byron

  On 04/02/10 7:11 PM, Donald Chalfant wrote:
  > Not too mysterious. Lug nuts not tightened correctly, or somebody is
  trying to collect on her life insurance.   Take the drum off, put it on the
  driveway, open side down. Take a center punch and a big hammer. Drive out
  the old studs.  Insert the new studs  into the drum splines, put a big
  socket on the cement for the stud to stick down into, hold the drum level
  with one hand and use the big hammer to whack the new studs home.
  >    ----- Original Message -----
  >    From: Jason Tennant
  >    To: MR2 List
  >    Sent: Friday, April 02, 2010 9:52 PM
  >    Subject: [MR2] Studs
  >
  >
  >    Hey guys I have a non MR2 related question. My wife has a 99 Dodge Ram
  >    1500 2 wheel drive with rear Drum brakes. Well the left rear tire
  >    studs either broke off or stripped today after getting a mysterious
  >    shaking and raddling noise throughout the truck. My question is how do
  >    I go about changing the studs out?
  >
  >    YN3 Tennant
  >
  >    

  _______________________________________________
  MR2 Mailing List
  MR2 at mr2.com
  http://mr2.com/mailman/listinfo/mr2_mr2.com



  _______________________________________________
  MR2 Mailing List
  MR2 at mr2.com
  http://mr2.com/mailman/listinfo/mr2_mr2.com