[MR2] Re-wiring problems:-(

[bryan kohart]

The starter has 2 wires (1 large from batt, 1 small from engine harness) and a connector.  The alt has 1 large and a connector.  As Aaron said, the transaxle wire is a ground that can be connected anywhere on the chassis.  I'm drawing a blank on the gray wire.  The 2-pin gray connector is probably the reverse switch which is mounted on the tranny in the general area you're describing.

 

-bryan


> 
> Message: 6
> Date: Mon, 21 Sep 2009 20:48:31 +0100
> From: Angus Harvey <cheekeychavie at googlemail.com>
> Subject: [MR2] Re-wiring problems:-(
> To: mr2 at mr2.com
> Message-ID:
> <9e287d530909211248j22961e3ew12c31d783595b03f at mail.gmail.com>
> Content-Type: text/plain; charset=ISO-8859-1
> 
> Hello all...i have recently switched my engine for a likewise secondhand 3s ge!
> My problem is with re-attaching the loom! My problems are as follows:
> 
> Do the both the starter motor and alt both have two big wires bolted
> on to the terminal?
> 
> There is a black wire which is attached to the gearbox via a bolt.
> Where should the other end of this attach?
> 
> There is a another wire which looks like the one I just mentioned but
> grey, which is coming from under the fuse/relay box. cant see where
> this should attach.
> 
> There is a snap on 2 pin grey plug which comes from loom under
> throttle intake/water pipe connections and I cant find a home for
> this.
> Pls try help, I know it is hard without seeing it.
> 
> 

 		 	   		  
_________________________________________________________________
Hotmail® has ever-growing storage! Don’t worry about storage limits.
http://windowslive.com/Tutorial/Hotmail/Storage?ocid=TXT_TAGLM_WL_HM_Tutorial_Storage_062009