[MR2] Anyone heard of this happening?

[DAVIES, BARRY S (BARRY)]

Yeh, I've used these and had mixed results. Same with EZ outs, they
either work or snap!
Cheers
Barry

-----Original Message-----
From: ed jr [mailto:edgrvsjr at napanet.net] 
Sent: Tuesday, March 17, 2009 9:09 PM
To: Kurt Krueger; DAVIES, BARRY S (BARRY); waynearndt at waynearndt.com;
mr2 at mr2.com
Subject: Re: [MR2] Anyone heard of this happening?

http://www.newmantools.com/drillout/index.html

these have worked well for me.  Sears carries or did carry a set.  Ace
hardware also did carry them.

ed jr
86 mk1

>
> -------------- Original message ----------------------
> From: "DAVIES, BARRY S (BARRY)" <daviesb at alcatel-lucent.com>
>>
>> The motor is out, so access is not a problem (we've got this down to 
>> a fine art, we can get an MR2 motor out in under 4 hours!) Where can 
>> reverse drill bits be had? I presume Home Depot wouldn't stock them!
>> Barry
>
> Harbor Freight has them.  I've got a set but have yet to use them.
> The ones I have are titanium nitride coated.
>
> I've got some of their standard black drill bits, but they are 
> brittle.  Wouldn't use them on something where breaking one would be a

> disaster
>
> Can't vouch for the left handed ones, but they do have them.
>
> I couldn't find anything at Sears or Home Depot websites.
>
>
> _______________________________________________
> MR2 Mailing List
> MR2 at mr2.com
> http://mr2.com/mailman/listinfo/mr2_mr2.com
>
>