[MR2] MK2 Turbo Parts Needed

[Donald Chalfant]

The VSV for the ABV part no is 90925-01059  list $40.44 my invoice sys. Just 
got one a few days go.  Mae a world of difference until I blew another leak 
into the intake system somewhere at about 15 psi.

That pipe was extremely rusted (caked rust) on mine at the ABV end.  I 
cleaned up to bare metal but would be happier with a nice enamel finish like 
the rest of the pipe.

I'm too stiff to get under the dash, you're on your own there.
----- Original Message ----- 
From: "Dennis McFayden" <mr2garage at yahoo.com>
To: "MR2 Email" <mr2 at mr2.com>
Sent: Friday, November 07, 2008 8:31 AM
Subject: [MR2] MK2 Turbo Parts Needed


>I need the check valve that is associated with the Air bypass valve. This 
>check valve is the one that is black on one side and a light violet color 
>on the other side.
>
> I tried to identify the Air Bypass Valve on the EPC but could not find it. 
> Anybody know the Toyota part number for the check valve and OEM cost if 
> still available?
>
> I also need the pipe that goes between the Air Bypass Valve and the turbo 
> air intake. This pipe is about 1.25 inches in diameter and has a 90 degree 
> bend on one end.
>
> I also need the plastic pipe that under the drivers side dash that 
> connects the drivers side air vents. That pipe is the same for all MK2 
> MR2s. I posted this need once before and got a couple of responses but no 
> answers when I offered to purchase.
>
> Dennis
>
>
>
> _______________________________________________
> MR2 Mailing List
> MR2 at mr2.com
> http://mr2.com/mailman/listinfo/mr2_mr2.com
>


--------------------------------------------------------------------------------



No virus found in this incoming message.
Checked by AVG.
Version: 8.0.100 / Virus Database: 270.9.0/1773 - Release Date: 11/7/2008 
9:08 AM
-------------- next part --------------

No virus found in this outgoing message.
Checked by AVG. 
Version: 8.0.100 / Virus Database: 270.9.0/1773 - Release Date: 11/7/2008 9:08 AM