[MR2] <MKII> Weather seal issues
cavscoutmr2 at gmail.com
Fri Nov 30 13:15:04 EST 2007
That is one of my flaws. Sometimes I am too analytical. :)
I put the top back in today and adjusted it to meet the glass, BUT, it
pushed it too far out and it prevented contact with the seal that runs down
the rear side of the glass. At that point, adjusting the glass entered my
mind. I am going to change out the door panels anyway, so while I have it
off, I'll do just that.
Thanks for confirming my idea. :thumbsup:
On Nov 30, 2007 12:08 PM, Aaron Willis <AWillis at lithia.com> wrote:
> You're thinking too hard, Kevin! Adjust the door glass instead. This
> is done by removing the interior door panel, then jacking the channels
> that the window rides in. The screws that hold the channels to the door
> skin have a slot in the end for a screwdriver, and they can be adjusted
> to move the channel in or out and then locked in place with jam nuts.
> Aaron Willis, Parts Dept.
> Lithia Toyota Scion of Springfield
> Ph. (541)736-3221 (direct)
> Ph. (800)888-6305 (toll free)
> Fax (541)747-4174
> MR2 specialist & offical vendor:
> www.mr2oc.com and www.mr2.com
More information about the MR2